8.11.6 Controlling power seat functions
INFORMATION
If your power wheelchair is equipped with an LCD monitor, please also read the section "Separate LCD monitor"
(see Page 46).
•
Power seat functions are activated and controlled via the control panel (see Page 24).
•
Holding the [Mode] button (approx. 2 seconds; ) activates control of the first power seat function.
•
The LCD screen indicates the currently selected seat function (see the following section "Joystick functions").
The driving function is not available at this time and the speed level indicator switches off.
•
To switch between the various seat functions, press the [Mode] button briefly or move the joystick to the right.
•
Once a seat function has been activated, it is adjusted by moving the joystick forward or backward.
•
The electric motor moves the seat according to the seat function as long as the joystick is deflected and stops
at the end positions.
•
Holding the [Mode] button again (approx. 2 seconds) deactivates the seat function in the selected position. The
driving function is available again and the speed level indicator on the LCD screen is lit.
8.11.7 Joystick functions
INFORMATION
To operate the seat functions with installed LCD monitor: see Page 46.
The following power seat functions can be controlled with the joystick:
Display
Display
Function
Joystick movement
1)
Power seat height adjustment
Forward: Seat surface moves up
Back: Seat surface moves down
Power seat tilt
Back: Seat slowly tips back
Forward: Seat slowly tips forward to a
horizontal position
Power back angle adjustment
Forward: Backrest tilts forward
Back: Backrest tilts backward
29
S1
Special functions (e.g. coupled
back adjustment and seat tilt)
Forward: Seat functions move forward
Back: Seat functions move back
1)
Direction of movement can be modified by the specialist dealer.
8.12 Manual seat functions
The power wheelchair can be equipped with a range of different optional mechanical seat functions.
For more information on the specific equipment of this power wheelchair, contact the qualified personnel.
8.12.1 Safety instructions
WARNING
Driving with mechanical seat functions
Risk of falling or tipping over due to operator error
►
Drive in road traffic and on inclines and downgrades only with a vertical backrest. Always use a belt system.
►
Drive with the back angle adjustment activated only for short distances at home. Always use the speed level 1
for this. Note that the field of vision is limited when driving. Always use a belt system.
42
Use
Skippi Plus
