Otto Bock Skippi plus, Instructions For Use Manual

Page: 51 / 76

[On/Off] button
The button is used for switching the power wheelchair on, activating the drive-away lock and switching the wheel­
chair off.
[Charge level] LED display
INFORMATION
► The following information on LED function only applies when the attendant control is used as an individual
input device.
► If the
control panel/attendant control are used in combination
, the battery charge level is indicated by
the display symbols on the LCD screen (see the section "Button and display functions").
The LED lights up when the unit is on.
Colour and flash codes provide information on the current battery charge level:
LED Information
Green is lit Battery charge level >70 %
Orange is lit Battery charge level 30% - 70%
Red is lit Battery charge level < 30%
Red is flashing Battery deep discharge
Charge as soon as possible
Green is flashing Battery over-voltage (e.g. after driving downhill)
Continue driving slowly
Red/orange/green flashing
alternately Charging process/drive-away lock
[Mode] button
Switch between speed level 1 and 2 by pressing the button briefly.
Push and hold the button (at least 2 seconds) to switch the control unit to the power seat functions.
[Mode] LED indicator
INFORMATION
►
The following information on LED function only applies when the attendant control is used as an individual
input device.
► If the
control panel/attendant control are used in combination
, the selected speed level and errors are
indicated by the display symbols on the LCD screen (see the section "Button and display functions" and
"Wheelchair control unit fault overview").
The LED has 3 colour and various flash codes to indicate the statuses of the speed level and system faults:
LED Information
Green is lit Speed level 1
Orange is lit Speed level 2
Red is flashing Fault (see Page 69)
Off LED indicator switched to seat function
[Selected power seat function] LED indicator
INFORMATION
►
The following information on LED function only applies when the attendant control is used as an individual
input device.
► When the
control panel/attendant control are used in combination
, the chosen seat function is indicated
by the display symbols on the LCD screen (see the section "Power seat functions" > "Joystick and display
functions").
The power seat functions are accessed by depressing of the "M" button for approx. 2 seconds.
The currently selected seat function is indicated by the following LEDs:
51 Skippi Plus
Use