11.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
11.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit
ted this product or the manufacturer's service (see inside back cover for addresses).
11.3 Privacy notice
Some components of the product contain data storage modules that temporarily or permanently store data. These
data are exclusively of a technical nature and serve the safety of the user, the identification and elimination of errors
and/or optimising the functionality of the product.
Depending on the model and version, malfunctions and faults of components relevant for safety as well as status
messages of individual components are recorded. The data are available in anonymised/pseudonymised form
when the data storage modules are read in case of service. Ottobock stores, processes and uses the data accord
ing to the applicable data protection regulations.
For detailed questions please contact: [email protected]. For questions regarding treatment, please con
tact the qualified personnel.
11.4 Service life
Expected lifetime:
5 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
►
Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
►
Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
General information
Application class (in compliance with DIN
EN 12184)
Class B
Dimensions and weights
Seat depth
290 – 370 mm (11.4" – 14.5")
Seat width
Seat width with removable lateral pads
300 – 420 mm (11.8" – 16.5")
240 – 360 mm (9.4" – 14.2")
Seat height
445 mm (17.5")
Lower leg length
150 – 430 mm (5.9" – 16.9")
Dimensions and weights
Angle of the seat surface
0°–6°
Angle of leg to seat
90°–170°
Distance from arm support to seat
225–325 mm (8.9"–12.8")
Front position of the arm supports
300–580 mm (11.8"–22.8")
Forearm support height
160–230 mm (6.3"–9")
Forearm support length
235 mm (9.3")
Back support height*
400/420/440/460 mm (15.7/16.5/17.3/18.1")
Overall width
590 mm (23.2")
Overall height
775 mm/840 mm (30.5"/33.1")
Overall length
With leg supports: 870 mm/940 mm (34.2"/37")
Without leg supports: 640 mm/710 mm (25.2"/28")
Weight when empty*
66.5 kg (146.5 lbs)
71
Skippi Plus
Technical data