Driving data
Speed*
See nameplate for precise information: 6 km/h (3.7 mph); 7.2 km/h
(4.4 mph)
Climbing ability (basic model)**
7° (12%)
Dynamic stability – uphill***
7° (12%)
Static stability – uphill/downhill
9° (15.8%)
Static stability – sideways
9° (15.8%)
Maximum obstacle height
60 mm (2.4")
Driving distance range (on level sur
faces)****
Approx. 25 km (15.5 miles)
Braking distance (according to DIN EN
12184:2009)*****
At 6 km/h (3.7 mph): 1000 mm (39.4") – on level surfaces; 2000 mm
(78.7") – on incline
At 7.2 km/h (4.4 mph): 1200 mm (47.2") – on level surfaces; 2400 mm
(94.5") – on incline
* The specified speed can vary by ±10%.
** The control device and the motors must be protected against overloading. Therefore, the continuous climbing
ability depends on the overall weight (wheelchair user load), as well as the ground conditions,
exterior temperature, battery voltage and driving style of the user. In individual cases, the continuous climbing abil
ity may be significantly lower than the specified climbing ability.
*** Approved climbing ability with lowered seat functions, upright back support and lowered leg supports.
**** The specified driving distance range was determined under defined conditions according to ISO 7176-4. In
practice, the driving distance range can be reduced by up to
50 per cent
. For information on this, see the section
"Driving distance range" in the instructions for use (user).
***** The braking distance can be correspondingly longer due to user weight, installed options and condition of the
tyres as well as weather and surface conditions.
Allowable environmental conditions
Operating temperature
-15 °C to +40 °C (+5 °F to +104 °F)
Transport and storage temperature
-15 °C to +40 °C (+5 °F to +104 °F)
Relative humidity
45% to 85%; non-condensing
Corrosion protection
Corrosion protection
Dip-coated frame (KTL coating)
13 Appendices
13.1 Threshold values for wheelchairs transportable by train
INFORMATION
►
The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities. However, not all versions can comply with all
threshold values due to different settings.
►
With the help of the table that follows, you or the qualified personnel can take measurements and verify wheth
er the specific product in question meets the threshold values.
Feature
Threshold value (according to regulation (EU) No. 1300/2014)
Length
1200 mm (47.2"); plus 50 mm (2") for the feet
Width
700 mm (27.6"); plus 50 mm (2") on each side for the hands when
moving
Smallest wheels
approx. 3" or greater according to the regulation, the smallest wheel
must be able to accommodate a gap measuring 75 mm (3") horizont
ally and 50 mm (2") vertically
Height
max. 1375 mm (54.1"); including a 1.84 m (72.5") large male wheel
chair user (95th percentile)
Turning radius
1500 mm (59.1")
Maximum weight
300 kg (661 lbs); for wheelchair with occupant, including baggage
50 mm (2")
73
Skippi Plus
Appendices
