56
Fastening the restraint lap belt
1) Guide each end of the restraint lap belt from the
inner side of the seat through to the outer side of
the seat.
2) Engage the end of the restraint lap belt on the pin
(see fig. 56).
8.17.3 Restrictions for use
WARNING
Risk of accidents and injury due to using the product with certain settings and/or installed options
Severe injury in case of accidents due to options coming loose
►
Before using the product as a seat in a vehicle for transporting persons with reduced mobility, remove options
that need to be taken off for safe transportation. Please observe the following table.
►
Stow all dismantled components securely in the vehicle for transporting persons with reduced mobility.
►
Please note that certain settings on the product exclude the use of the product in a vehicle for transporting
persons with reduced mobility.
Accessories*
Transportation in a
vehicle for trans
porting persons
with reduced mobil
ity not possible
Remove option
Secure option on
product
Power back support angle adjustment
X
Head support with mounting kit
X**
X***
Tray, swing-away to the side
X
Lap belt with buckle
X****
Mid-tray control, swing-away to the right or
left
X
Chin control with mini joystick, power
swing-away
X
Chin control with midi joystick, power
swing-away
X
Control panel holder, swing-away in parallel
X
* The following list provides an overview. Not all accessories are installed on all products.
** If the installed head support is not crash-tested, please remove the option.
*** The head support can remain on the power wheelchair if it is crash-test approved. Please refer to the order
form for the approved head supports.
**** The lap belt can be used to position the passenger during transportation. Using the personal restraint system
is nevertheless required.
62
Use
Skippi Plus
