95
Preparing for transport
1) Fold the back support forward and onto the seat
surface (see Page 23).
2) Remove the side panels (see Page 19). Place the
side panel with control panel on the seat.
3) Remove the legrests (see Page 22).
6.17.3 Preparing for transport
96
Transporting the power wheelchair
1) Position the power wheelchair in its transport loca
tion.
2) Turn the control unit off (see Page 25 ff.).
3) Verify brake locking. It should not be possible to
push the power wheelchair.
If needed:
Lock the brake (see Page 50).
4) Use the eyebolts and cargo straps to attach the
power wheelchair to the transport vehicle (see
arrows).
97
Transporting the power wheelchair
1) Position the power wheelchair in its transport loca
tion.
2) Turn the control device off (see Page 25 ff.).
3) Verify brake locking. It should not be possible to
push the power wheelchair.
If needed:
Lock the brake (see Page 50).
4) Use cargo straps to attach the power wheelchair to
the transport vehicle. To do so, use the eyebolts on
the frame (see fig. 97, right) and the opposite
caster wheel swing arms (see fig. 97, left).
INFORMATION: Place respectively 2 x one belt
loop around each caster wheel swing arm in
the marked area.
98
Use
Juvo
Summary of Contents for Juvo
