Otto Bock Juvo, Instructions For Use Manual

Page: 42 / 124

Display Information
Select a device, e.g. [TV]. The commands which have been set up for the device are
displayed.
Select the command which needs to be learned, e.g. [Volume down].
Select [Learn code].
Point the TV remote control towards the control panel and press the desired button
(e.g. [Volume down]) twice in succession. The learning mode is displayed on the
control panel.
INFORMATION: Hold the remote control at a distance of 40 to 100 mm (1.57"
to 3.94") away from the receiver for infrared signals.
The receiver is located on the front side of the control panel above the LCD
screen (see arrow).
A tick mark indicates that the learning process was successful.
If the learning process was not successful, an X is displayed. Repeat the learning
process in this case.
6.6.2.5.3 Activating and deactivating IR codes
The learned IR codes can be activated or deactivated:
•
Once an IR code is deactivated, it no longer appears in the user menu. The corresponding command
(e.g. [Volume down]) can no longer be transmitted or executed.
• If an IR code is activated, it appears in the user menu. The corresponding command (e.g. [Volume down]) can
be transmitted and executed.
42
Use
Juvo