Otto Bock Juvo, Instructions For Use Manual, Page: 80 / 124

INFORMATION
Latched drive mode can only be used for driving forwards and in reverse. Turning movements are not possible in
Latched drive mode.
6.15.3.5 User switch
Operating with user switch
When the LCD monitor (Omni module) is used as part of the special control, the qualified personnel may also have
connected a separate user switch.
Function (standard setting): When the user switch is pressed, the control device switches from driving mode to
the menu. Here the user can control the seat functions or use additional functions, such as environmental control
via IR.
In standard programming, the system first toggles through the individual seat functions. The "Exit" option is then
displayed, which can be used to return to Drive mode. If the user switch is pressed again while a seat function is
displayed, the system moves through the operating options for the specific seat function, i.e. "Up", "Down" or
"Exit". The corresponding action can also be triggered by pressing the user switch at this level.
Pressing the user switch
while driving
triggers an emergency stop.
INFORMATION
The standard setting can be adapted to the user's abilities by the qualified personnel through technical program­
ming. Have the qualified personnel instruct you in the specific function of the user switch.
Operating without user switch
The special controls assembled with the LCD monitor can also be implemented without a user switch. This can be
helpful if the user is unable to operate a user switch.
In this case the control device – depending on the programming – starts for example in the menu. When the "Exit"
option is displayed, it is possible to return to Drive mode.
6.15.4 Push-button controls
6.15.4.1 Product description
With the button control, users who do not have sufficient hand motor skills to move the standard joystick on the
control panel are able to control the power wheelchair. Buttons of various sizes are available for this purpose.
The push-button control has 1 button (scan function, also called scan-light control).
All functions including the driving function can be controlled using this button (exception: Bluetooth functions). The
system automatically moves through the driving directions display and the menu display at a configurable speed.
Pressing the button implements the currently displayed driving direction or function.
The push-button control has 3 buttons.
These buttons are used with the following functions:
•
Forward/reverse
• Right
• Left
The push-button control has 4 buttons.
These buttons are used with the following functions:
•
Forward
• Reverse
• Right
• Left
6.15.4.2 1-button control (scan function)
6.15.4.2.1 Drive mode
The sampling rate in Drive mode can be programmed by the qualified personnel to adjust to the user's abilities.
80
Use
Juvo