Otto Bock Juvo, Instructions For Use Manual, Page: 38 / 124

30
31
>
Prerequisite:
The device registration has been
activated (see Page 36).
1) Turn on the wheelchair control device.
2) On the Android device, open the
Settings
menu.
3) Under the item Wireless and networks , open the
Bluetooth menu item and activate the Bluetooth
function.
Alternatively, open the
Bluetooth menu item dir­
ectly and activate the Bluetooth function.
4) Select the Bluetooth mode on the TEN° control pan­
el by pressing the [Profile/mode] button a number
of times if necessary.
→
A list of the available devices is displayed.
5) Start the pairing process by selecting a suitable
device name, e.g.
Tom's tablet
(to scroll through
list: joystick front/back; to select an entry: joystick to
the right).
→ The tablet symbol is displayed (see Fig. at left).
6) Move the joystick forwards for approx. 10 seconds
until an acoustic signal sounds.
7) Move the joystick back for approx. 10 seconds until
an acoustic signal sounds.
→
The Bluetooth symbol at the top of the control
panel display (next to the time) should flash. The
TEN° control panel is ready to establish a con­
nection.
8) Wait until the device name selected in step 5 is dis­
played on the Android device.
WARNING! If additional Bluetooth devices are
nearby, these are also displayed.
9) Tap the device name displayed on the Android
device to establish the pairing.
10) After the device has been successfully added, the
Bluetooth symbol is continually displayed in blue on
the TEN° control panel and the Android device can
be operated using the joystick on the control panel
or via the connected special control.
Pairing with an iDevice
To pair with an iOS device (e.g. iPhone, iPad), perform the following steps:
32
>
Prerequisite:
The device registration has been
activated (see Page 36).
1) Turn on the wheelchair control device.
2) Tap
Settings
>
Bluetooth
on the iOS device.
Remain on this screen until the steps for pairing
with the TEN° control panel have been completed.
3) Select the Bluetooth mode on the TEN° control pan­
el by pressing the [Profile/mode] button a number
of times if necessary.
→ A list of the available devices is displayed.
4) Start the pairing process by selecting a suitable
device name, e.g.
Tom's iPhone
(To scroll through
list: joystick front/back; to select registration: joy­
stick to the right).
→ The iPhone symbol is displayed (see Fig. at
left).
38
Use
Juvo