64 | Ottobock
B500-S classic
Ottobock products in wheelchair accessible vehicles, order
number 646D158.
Straps can be attached via the eyebolts on the frame (see
section 'Necessary accessories').
Before transporting the power wheelchair switch off the con
trol unit and engage the brake.
6.15 Care
6.15.1 Safety Instructions
NOTICE
Incorrect cleaning
Risk of damage to the product, especially to the electronics
►
Water must not come into direct contact with the elec
tronics, motor or battery under any circumstances.
►
Never use a water jet or high-pressure cleaning appar
atus to clean the product.
►
Use a cloth or sponge for cleaning.
►
To avoid corrosion, don't use any aggressive cleaning
agents or solvents.
►
Check the driving behaviour of the product after clean
ing it.
INFORMATION
Piston rods do not require lubrication. They are mainten
ance-free.
6.15.2 Cleaning
The power wheelchair must be cleaned regularly, depend
ing on the amount of use and the degree of soiling.
•
Clean the control panel, battery charger, armrest and
trim components with a damp cloth and mild cleaning
solution.
•
Use a dry brush to clean the seat and back upholstery
as well as the seat cushion.
•
Use a damp plastic brush to clean the wheels and
frame.
6.15.3 Disinfection
►
Wipe all parts of the product with a disinfectant.
Important information about disinfecting
•
Water-based disinfectants should be used. Observe the
instructions for use provided by the manufacturer.
•
Prior to disinfection, clean the seat and back upholstery,
seat cushion, control panel and armrests.
7 Maintenance/Repair
7.1 Safety Instructions
WARNING
Improper maintenance, repairs or adjustments
User injuries, damage to the product due to failure to
observe maintenance intervals
Maintenance/Repair
