70 | Ottobock
B500-S classic
Closing the battery tray (on models without drive wheel
suspension)
1) Place the cover on the battery tray.
2) Close the strap buckle.
3) Replace the seat bottom and push it down tightly.
4) Press the seat cushion firmly onto the hook-and-loop
material on the seat plate.
7.3.2 Replacing a defective bulb
NOTICE
Penetration of moisture
Risk of damage to the light
►
During installation, ensure that the plates are seated
accurately in the housing.
►
Ensure that the screws are seated tightly against the
plate.
INFORMATION
Lamp housings and lamps can both be ordered from the
specialist dealer.
Fig. 46
Front lights
1 Notch (place screwdriver here)
2 Front LED light
Replacing the front direction indicator lamp
>
Remove the fuse (see previous section).
1) Place a small screwdriver into the notch in the direction
indicator housing and flip the cover down (see Fig. 46,
item 1).
2) Remove the cover.
3) Turn the defective bulb slightly to unlock it and then
remove it.
4) Grasp the new bulb with a cloth, insert it into the socket
and lock it in place.
5) Position the cover, hook it on and press it down tightly.
Maintenance/Repair
