Otto Bock 9B500-S CLASSIC, Instructions For Use Manual

Page: 17 / 84

Ottobock | 17 B500-S classic
► Ensure that your fingers are not in the danger area
when flipping the footrests up or down.
1) Loosen the 2 Allen head screws on the footrest bar
using a size 5 Allen key (see Fig. 6).
2) Adjust the footplate bar to match the user's lower leg
length.
INFORMATION: Ensure that the footplate bar is
inserted into the swivel segment by at least 40 mm.
3) Re-tighten the footrest bar screws.
Fig. 6 Adjusting the lower leg length
5.3.5 Adjusting the belt lengths
To adjust the belt lengths: see Page 56.
5.3.6 Adjusting the control panel
INFORMATION
The power wheelchair may be equipped with an optional
height-adjustable or swing-away control panel holder (see
Page 54).
Adjusting the control panel to the forearm length
1) Loosen the 3 set screws on the bottom of the armrest.
2) Slide the rail with the control panel forwards or back­
wards.
INFORMATION: If the control panel rail is too long
it can be shortened. Please contact the qualified
personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the armrest.
Preparation for Use