4 Delivery
4.1 Scope of supply
The power wheelchair is normally shipped fully assembled
and fitted to the personal requirements of the respective
user.
The scope of delivery includes:
•
Fitted power wheelchair with main components
•
Installed options
•
Battery charger
•
Instructions for Use (user)
4.2 Options
The standard model can be fitted to the user's personal
requirements through a large range of options.
A full list of the available modules and accessories is shown
on the order form and in the accessories catalogue.
To use options: see Page 18 et. seq.
4.2.1 Model B500-S classic
The B500-S classic power wheelchair can be equipped with
up to 2 of the following power seat options:
•
Power seat height adjustment
•
Power seat tilt available in 2 different versions (up to
30°, up to 45°)
•
Power back angle adjustment up to 30°
•
Power adjustable footrests
The wheelchair is controlled by an enAble40 control unit.
4.3 Storage
4.3.1 During daily use
The power wheelchair should always be protected against
external influences.
The control unit must be turned off.
4.3.2 In case of extended disuse
NOTICE
Deep discharge due to standby current
Risk of battery damage
►
Remove the fuse if the wheelchair is not used for more
than 3 days.
INFORMATION
To remove the fuse, see section "Repair" > "Replacing a
defective fuse".
Please observe the following if the power wheelchair is not
used for more than
3 days
:
Storage conditions
•
Maintain an ambient temperature between
-40 °C and
+65 °C
and a relative humidity between
45 % and 85 %
.
•
Store the power wheelchair in a dry, enclosed room with
sufficient air circulation and protection from external
influences.
12 | Ottobock
B500-S classic
Delivery
