Otto Bock 3R80, Instructions For Use Manual, Page: 36 / 192

36
CAUTION
Use of highly hygroscopic particles (grease-absorbent substances such as talcum)
Risk of injury, damage to the product due to lack of lubrication
► Do not allow the product to come into contact with highly hygroscopic particles.
► To reduce friction and to eliminate noise, apply 519L5 Silicone Spray directly onto the contact
surfaces of the cosmetic foam cover.
7.6 Finishing the prosthesis
►
CAUTION! 31
– page: 17 – To avoid product damage and the risk of falling, finish the pros­
thesis by replacing set screws that are too short or too long and by tightening all screw con­
nections. In doing so, observe the instructions for use for all prosthetic components regarding
assembly tightening torques and thread lock.
8 Use
8.1 Information for use
CAUTION
Overheating of the hydraulics due to excessive strain
Burns, injuries caused by falling due to changes in functionality and damage to prosthetic com­
ponents
► Do not touch overheated prosthetic components.
►
Reduce all activities if there are changes in functionality, in order to allow the overheated
prosthetic components to cool down.
► If overheating or changes in functionality occur, have the prosthesis checked by authorised
qualified personnel.
NOTICE
Mechanical overload
Impaired functionality due to mechanical damage
►
Check the product for damage prior to each use.
► Do not use the product if its functionality has been impaired.
►
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
INFORMATION
Leak in the product's hydraulic system
Environmental damage or skin irritation due to leaking hydraulic oil
► Before each use, check the product for leaking hydraulic oil.
►
In case of leaks, do not continue using the product and have it repaired promptly.
8.2 Cleaning
CAUTION
Use of unsuitable cleaning agents or disinfectants
Impairment of functionality and damage due to incorrect cleaning agents or disinfectants
►
Only clean the product with the approved cleaning agents.
► Only disinfect the product with the approved disinfectants.
►
Observe the instructions for cleaning and care.