Otto Bock 3R80, Instructions For Use Manual, Page: 37 / 192

37
Permissible cleaning agents and disinfectants
Requirements:
Free of solvents, chlorine and phosphates
INFORMATION
►
Clean the product if it gets dirty.
►
Observe the instructions for cleaning and drying in the section “Environmental conditions”
(see page 30).
►
Only use cleaning agents and disinfectants that do not affect the materials of the product.
Test the chosen agent for material compatibility in an inconspicuous location.
► Do not spray the product directly with a pump spray or propellant spray cleaner and disin­
fectant.
►
Only apply cleaners and disinfectants using a soft, lint-free cloth.
►
Dry with a soft, lint-free cloth. Allow to air dry in order to remove residual moisture.
► Observe the cleaning instructions for all prosthetic components.
9 Maintenance
CAUTION
Failure to follow the maintenance instructions
Risk of injuries due to changes in or loss of functionality and damage to the product
►
Observe the following maintenance instructions.
►
NOTICE! Do not lubricate and grease the prosthetic joint
.
►
NOTICE! Repair work must be performed exclusively by manufacturer service.
►
Arrange regular maintenance intervals with the patient depending on the level of use.
►
Following an individual period for the patient to get accustomed to the prosthesis, check the
settings of the prosthetic joint and adapt them to the patient's requirements again as needed.
►
The prosthetic components should be inspected after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consultations.
►
Conduct annual safety inspections.
►
As part of the safety inspections, inspect the prosthetic joint for wear and proper functionality.
Special attention should be paid to movement resistance, bearings and abnormal noises. Full
flexion and extension must be ensured at all times. Readjust as required.
10 Disposal
In some jurisdictions it is not permissible to dispose of the product with unsorted household
waste. Improper disposal can be harmful to health and the environment. Observe the information
provided by the responsible authorities in your country regarding return, collection and disposal
procedures.
11 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
11.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.