![background image](http://html1.mh-extra.com/html/oshkosh/x17j/x17j_operation-safety-and-maintenance-manual_1655726104.webp)
6.6 RADIO CONTROL CHARGE AND EMERGENCY ELECTRICAL CONNECTION
The radio control is powered by a battery that guarantees more than 60 hours of autonomy
in standby mode.
The battery charge level is always shown on the display when this is on (see photo). Obviou‑
sly, if the battery is completely down the radio control will go out and no machine function
will be available, in this case it is possible to use the second spare battery supplied with the
machine or, if even this is completely down, to connect the radio control to the receiver on
board the machine using the special cable provided (see photo).
Battery replacement and connection of the radio control to the receiver must be carried out
with the machine off and the electronic board not powered (engine key in position OFF).
The radio control battery can be recharged using the battery charger provided on board the
machine, under the electrical component protection casing (see photo).
The battery charger works only if the electronic board is on, and starts working when the
engine is on or when the machine is connected to the electric network and the circuit breaker
is closed (see photo).
X17JR0420113
100
BOOM LIFT MODELS X17J
JLG
Summary of Contents for X17J
