Oshkosh X17J, Operation Safety & Maintenance Manual

Page: 86 / 172

6.4.10 A
UTOMATIC LOWERING AND RAISING OF THE STABILISERS
The elevating platform is fitted with an innovative self‑levelling system that acts on the stabi‑
lisers and uses the electronic spirit level provided on the main control board.
For the self‑levelling procedure, all the precautions described to this point apply.
Before starting the self‑stabilization make sure that the machine is on a slope less than the
total permitted limit for stabilization (see technical data of the machine) and verify that the
trajectory of the stabilizers is free of obstacles and impediments.
The automatic procedure for levelling the machine extends and retracts the stabilisers,
and consequently moves the machine. Always check that there are no people, animals or
things in the stabilisation area.
• AUTOMATIC LOWERING OF THE STABILISERS
Press and hold button 7 on the radio control.
The success of the self‑levelling procedure is confirmed by an icon displayed on the screen
for several seconds.
At the end of the procedure, always make sure that the spirit level is in the green area. If this
is not the case, contact JLG after‑sales service.
ATTENZIONE
X17JR0420113
82
BOOM LIFT MODELS X17J
JLG
ATTENTION
OK