Oshkosh JLG 1500SJ, Service And Maintenance Manual

Page: 55 / 706

SECTION 3 - CHASSIS & TURNTABLE
3121262 – JLG Lift – 3-5
Press ENTER , the screen should read:
To enable the override mode 58237 must be entered as the
code. When the code is entered, the screen will show:
Use the Left or Right arrow key until you see:
Press ENTER , the screen should read:
Swing and drive functions can now be used to swing the turn-
table in the correct direction to return the boom between the
rear wheels in the event the boom is beyond the swing enve-
lope when the axles are retracted.
NOTE: For more detailed information concerning system adjust-
ment and operation, refer to Section 6 - JLG Control Sys-
tem.