Oshkosh JLG 1500SJ, Service And Maintenance Manual

Page: 167 / 706

SECTION 3 - CHASSIS & TURNTABLE
3121262 – JLG Lift – 3-117
25. Connect the hoses to the main valve and pressure filter
as tagged during removal.
26. Reconnect the negative battery terminal.
27. Using auxiliary power, lower the boom to horizontal.
28. Attach an adequate lifting device to the jib and position
it in front of the boom.
29. Place something under the front of the jib that will allow
it to slide or move along the ground easily. Attach a lift-
ing device to the rear of the jib, allowing the front to
pivot on the ground.
30. Lift the jib into position on the boom fly section and
install the jib pivot pin. Apply JLG Threadlocker P/N
0100019 to the bolt and secure the pivot pin in place
with the keeper pin and bolt. Torque the bolt to 165
ft.lbs. (224 Nm).