![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-830p/jlg-830p_operation-and-safety-manual_1655769035.webp)
SECTION 3 - MACHINE OPERATION
3-6
31215862
At the ground control box, the battery charge indicator displays
a series of red LEDs. One LED is lit at a time to indicate battery
charge.
1.
Full Battery Charge
On the battery charger inside in the chassis, the charge level can
be monitored on the side of the charger.
Plug in the charger to an available power supply and ensure the
"low" LED illuminates. A flashing LED indicates a fault. Discon
-
nect and reconnect to the power supply. If flashing continues,
seek technical support.
The LEDs will illuminate in sequence. When the "full" LED is illu
-
minated, charging is complete.
The battery charger can be connected to the AC power supply
at any time or left for extended periods.
NOTICE
AC POWER SUPPLY CIRCUIT SHOULD BE PROTECTED WITH A BREAKER CIR
-
CUIT. ONLY CHARGE BATTERY IN A WELL-VENTILATED AREA.
1
To
order
go
to
Discount-Equipment.com