![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-830p/jlg-830p_operation-and-safety-manual_1655769030.webp)
SECTION 3 - MACHINE OPERATION
31215862
3-1
SECTION 3. MACHINE OPERATION
3.1 GENERAL
NOTICE
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICA
-
TION AND OPERATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR
CONFORMING WITH GOOD SAFETY PRACTICES.
This section provides the necessary information needed to
understand control function and operation.
DO NOT RAISE PLATFORM UNLESS THE MACHINE IS ON A SMOOTH, FIRM
SURFACE, WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE, FREE
OF OBSTRUCTIONS AND HOLES.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL
LEVERS OR TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT
RETURN TO THE OFF OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS
RELEASED, USE THE EMERGENCY STOP SWITCH TO STOP THE MACHINE.
3.2 MACHINE DESCRIPTION
This machine is a Mobile Elevating Work Platform (MEWP) used
to position personnel along with their necessary tools and
materials at work locations.
This MEWP is manually propelled push-a-round machine with a
work platform mounted to an elevating mast mechanism. The
personnel lift's intended purpose is to provide personnel (with
their tools and materials) access to areas above ground level.
When the platform is fully lowered, the machine can be pushed
on its wheels between work areas on a smooth, firm surface
within the limits of the maximum operating slope. It can also be
transported by forklift truck or loaded onto a suitable vehicle.
The machine also has a ground control station that can override
the platform control station. Ground controls operate lift up and
down functions only. Except for performing inspections and
function checks, ground controls are to be used only in an emer
-
gency to lower the platform to the ground should the operator
in the platform be unable to do so.
To
order
go
to
Discount-Equipment.com