Oshkosh Corporation JLG 450AJ, Service And Maintenance Manual

Page: 116 / 342

SECTION 4 - BOOM & PLATFORM
4-38 – JLG Lift – 3121659
2. Parts used: Bracket Center Pin and Center Pin Snap Ring.
3. Take new bracket and install bracket center pin and
snap ring. Repeat on other bracket if replacing it.
NOTE: When installing snap rings make sure they are seated in
pin groove and closed properly.
Replace Moving End Brackets
REPOSITION CABLES/HOSES AND KEEP COVERED DURING GRINDING TO PRE-
VENT DAMAGE.
1. Remove existing pins and center rivet. Remove rivet as
shown in link removal instructions on page 4-20. Repeat
on other bracket if replacing it.
Correct
Incorrect