SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-10
31217156
6.4
OPERATOR MAINTENANCE
Scissor Arm Safety Prop
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PERFORMED ON THE
MACHINE REQUIRES THE SCISSOR ARMS TO BE RAISED.
1.
To engage the safety prop, raise the unloaded platform high
enough to allow the safety prop to rotate vertically into posi
-
tion.
2.
Rotate the rod keeper plate and release the safety prop actua
-
tor rod at the front of the machine.
3.
Lift the actuator rod (flat) up out of the slot in the keeper plate
bracket and pull the actuator rod to align the safety props verti
-
cally with the scissor arm center pins above and below the
safety prop mounting pins.
4.
Set the actuator rod (flat at the set position) into the slot on the
keeper plate bracket and rotate the keeper plate to lock the
actuator rod in this position.
5.
Lower the platform arms until the safety prop rests on the scis
-
sor arm center pin mounts above and below the safety prop.
Maintenance can now begin.
To store the safety prop, raise the platform, release the actuator
rod from the keeper plate bracket, push the safety prop rod so
that the safety props are restored back to its stowed position.
Lock the actuator rod in place with the rod keeper plate till next
use.
TO AVOID PERSONAL INJURY, USE SAFETY PROP FOR ALL MAINTENANCE REQUIRING
PLATFORM TO BE ELEVATED.
1.
Actuator Rod/Rod Keeper Plate.
2.
Safety Prop in set position.
3.
Safety Prop in stowed position.
1
To
order
go
to
Discount-Equipment.com
