SECTION 4 - EMERGENCY PROCEDURES
4-4
31217156
Platform Manual Descent Control
The platform manual descent control is used in the event of total
power failure to lower the platform using gravity. The manual descent
control T-handle is located on the front right of the machine. Look for
the instruction decal located beside the release handle.
The lowering procedure is as follows:
1.
Locate the
manual descent control T-handle
.
KEEP HANDS AND ARMS OUT OF THE PATH OF THE SCISSOR ARMS AND PLATFORM
WHILE LOWERING.
2.
Grasp the T-handle and slowly pull out to lower the scissor
arms/platform. When the platform is lowered to the desired
level, allow the T-handle to return to its closed position.
To
order
go
to
Discount-Equipment.com
