SECTION 4 - EMERGENCY PROCEDURES
31217156
4-1
SECTION 4. EMERGENCY PROCEDURES
4.1
GENERAL
This section explains the steps to be taken in case of an emergency
situation during operation.
4.2 INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident
involving a JLG product. Even if no injury or property damage is evi
-
dent, JLG must be contacted by telephone and provided with all nec
-
essary details.
•
USA: 877-JLG-SAFE (554-7233)
•
EUROPE: (32) 0 89 84 82 20
•
AUSTRALIA: (61) 2 65 811111
•
E-mail: [email protected]
Failure to notify the manufacturer of an incident involving a JLG
Industries product within 48 hours of such an occurrence may void
any warranty consideration on that particular machine.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE. DO NOT ELEVATE
THE PLATFORM UNTIL IT IS CERTAIN THAT ALL DAMAGE HAS BEEN REPAIRED AND
THAT ALL CONTROLS ARE OPERATING CORRECTLY. TEST ALL FUNCTIONS FIRST FROM
THE GROUND CONTROL STATION THEN FROM THE PLATFORM CONTROL CONSOLE.
4.3
EMERGENCY TOWING PROCEDURES
Towing this machine is prohibited, unless properly equipped. How
-
ever, provisions have been incorporated to move the machine in
case of a malfunction or power failure. The following procedures
are to be used ONLY for emergency movement to a suitable main
-
tenance area.
1.
Chock wheels securely.
2.
Disengage drive hubs by reversing disconnect caps.
3.
Connect suitable equipment, remove chocks, and move
machine.
4.
After moving machine, complete the following procedures:
a.
Position machine on a firm and level surface.
b.
Chock wheels securely.
c.
Engage drive hubs by reversing disconnect caps on hubs.
d.
Remove chocks from wheels as needed.
To
order go
to
Discount-Equipment.com
