SECTION 4 - HYDRAULICS
4-4
31215074
NOTE:
Care should be taken not to introduce any impurities
(dirt, water etc.) while plug is removed.
8. Replace plug and torque to 40 ft. lbs. (56 Nm).
9. Any time a hydraulic component is removed or
replaced, cycle the scissor arms several times and
refer to steps 3 and 4 to recheck oil level.
Slide Block Lubrication
Lube - White Lithium Grease (GREDAG 741)
Interval - Every 6 months
1. With the platform empty, elevate machine and
swing safety prop out of it’s stowed position.
CAUTION
ENSURE THE SCISSOR ARMS ARE PROPERLY SUPPORTED.
2. Locate the Lower and Upper Slide Pads and wipe/
pressure wash all dirt and debris from the slide
channel area (1, 2).
3. Apply a layer of grease along the inside and bot
-
tom of the lower slide channel (1) on both sides of
the machine.
4. Apply a layer of grease along the inside and top of
the upper slide channel (2) on both sides of the
machine.
Upper Slide Pad Channel
Upper Slide Pad Channel
Go
to
Discount-Equipment.com
to
order
your
parts