SECTION 3 - CHASSIS & SCISSOR ARMS
3-42
31215074
.
5. Remove the six bolts at the back of the ground
control and separate.
Tilt Sensor Replacement
Tilt Sensor Removal:
1. Disconnect the batteries.
2. Open the Ground Control Station to gain access to
the Tilt Sensor Assembly. (refer to prior mentioned
procedures)
3. Remove the four Screws (3), to remove the Tilt Sen
-
sor (1) and Sensor Mount (2) from the Ground Con
-
trol Box.
4. The Tilt Sensor (1) can be removed from the Sensor
Mount (2) by removing the three Screws (4).
NOTE:
Follow the above procedures in reverse order when
installing the tilt sensor assembly. After installing, be
sure to calibrate the tilt sensor (refer to Section 5.3,
2
1
Figure 3-28. Tilt Sensor Location
1. Ground Control Station
2. Tilt Sensor (JLG PN 4000021 or
1001114936)
Go
to
Discount-Equipment.com
to
order
your
parts
