SECTION 3 - CHASSIS & SCISSOR ARMS
31215074
3-11
Hub Disassembly
1. Remove main wheel bearing.
NOTE:
This part is held in the hub with a press. To remove
have the hub sitting seal side up. Use a plate or rod
with a large enough diameter push in the inner race
of the bearing. Apply force to the push the bearing
out. This bearing will need to be replaced upon reas
-
sembly.
2. Remove main lip seal.
NOTE:
This lip seal is also held in with a press fit. Remove
the lip seal only if the hub or seal needs to be
replaced. The lip seal will most likely become dam
-
aged during removal. Try not to damage the hub
bore.
1. Seal
2. Hub
3. Main Bearing
Figure 3-6. Hub Disassembly
Go
to
Discount-Equipment.com
to
order
your
parts
