5 USE
Inc. All rights reserved
58
5.2.2. REMOVING THE LEG SUPPORT ASSEMBLY
•
All leg supports are removable;
1. To do this, first retract the leg support to the outside of the wheelchair as
described in Section 5.3.1;
2. Next, grasp the leg support at the top and lift it off the base (
E
) (see Figure
28);
3. To install the leg support, position it at a 90
°
angle to the seat, then insert
the guide (
B
) into the base (
E)
(see Figure 28);
4. Then rotate it forward to secure it. The locking mechanism (
C
) must close
on the locking spacer (
D
).
Lifting the wheelchair by the leg support assemblies can be
dangerous.