4 ADJUSTMENTS
Inc. All rights reserved
36
NOTE:
If the axle does not lock, it may need to be adjusted.
To do this:
1. Remove the axle from the hub;
2. Using a
7/16 in. open-end wrench
, hold the end of the axle (
A
) (see Figure
15);
3. Using a
¾ in. open-end wrench
, slightly tighten or loosen the nut (
B
);
4. Reassemble the axle in the wheel and test it. It is best to always allow a small
amount of side play once the axle is locked
1/64 in.
Figure 15: Quick release axle: Adjustment.
NOTE
:
The Tango AC can be fitted with 12 in. diameter wheels. To do this, see Section
4.6.3.