4 ADJUSTMENTS
Inc. All rights reserved
39
Figure 17-A: Changing the rear wheel axle position.
To change the rear wheel position
:
1. Using a
7/16 in. open-end wrench
(see Figure 17-A), loosen the screws (
A
) on
each side of the wheelchair, without removing them.
2. Pull or push the rear wheel axle as needed and select a position on the
adjustment indicator. Refer to Table 1. The selected position determines the
maximum tilt degree. The number of the selected position, from +1 to +5,
should correspond to the distance mentioned in table 1 and can be applied
using the adjustment indicator graduated to ¼ in. (see ''rear wheel axle
position'' figure 17-B).
3. Check the stability of the wheelchair by operating the tilt mechanism.
Figure 17-B: Changing the rear wheel axle position
ADJUSTMENT
INDICATOR
