4 ADJUSTMENTS
Inc. All rights reserved
49
4.7.2. CHANGING OR INSTALLING A BRAKE LEVER EXTENSION
For easy brake access and application, you can install a telescopic extension on
the brake levers (see Figure 22):
Caution
: This assembly may be difficult to complete the first few times, so be
careful not to lose the pin (
C
).
Figure 22: Telescopic extension installation.
1. Install extension guides (
E
) on each side of brake lever (
A
);
2. Place the spring (
D
) provided with the extension (
F
) into hole (
B
).
3. Insert the pin (
C
) into the hole (
B
) by compressing the spring (
D
);
4. While holding the pin (
C
) inside the hole (
B
), slide the extension (
F
) so that it
covers the entire assembly.
4.7.3. CHANGING THE BRAKE LEVER ANGLE
The angle of the brake lever can be adjusted. There are four (4) adjustment positions.
To do this:
1. Unscrew the (
B
) screws (
3 mm Allen wrench
) and rotate the lever to the
desired position (see Figure 23);
2. Replace the (
B
) screws and tighten firmly.
