4. For 1740 mm cubicles
, use the following four
anchoring points:
Figure 4.37.
Location of anchor points in
cgmcosmos
cubicles
1740 mm high
5. For 1300 mm high cubicles,
apart from the front
anchoring points, position the angle bars supplied with
the equipment and fix them to the floor, so that they
are approximately in the middle of the rear gas relief
duct once the anchoring sequence is complete. Fit one
angle bar per function and two in compact cubicles.
Figure 4.38.
Push from the front of the cubicle
Figure 4.39.
Cubicle with angle bar in central position
IG-078-EN version 12; 23/04/2020
37
General Instructions
cgmcosmos
: Medium-voltage cubicles with full insulation
in SF
6
gas up to 24 kV in accordance with IEC Standard
Installation
Summary of Contents for velatia cgmcosmos
Page 119: ......
