6. Menu
SETPOINTS
IPR96D Ground Protection Relay
6.7
Instruction Manual: IPR96D GBM 24/11/2020
6.9 Setpoints: BLUETOOTH
This section contains information regarding the IPR96D Bluetooth connectivity.
Bluetooth
Device Name
Value
IPR96D1
–XXXXXX
Modify the Bluetooth ID.
If an external device carries out a Bluetooth scan, the IPR96D will appear with
the Device Name specified on the screen.
6.10 Setpoints: FIRMWARE UPDATE
Before proceeding with the upgrade, the user must make sure to not have any issues regarding the power supply.
DO NOT DISCONNECT POWER SUPPLY during the firmware upgrade, the device could remain unusable.
Orion Italia cannot be held responsible for any damage that may incur following the incorrect firmware upgrade procedure.
The IPR96D firmware can be updated by Bluetooth or by serial RS-485 port.
Firmware Update
RS485 Update
BLE Update
To initialize the upgrade, select the method and press
ENTER
.
Firmware Update
Ready to be Updated
The IPR96D is waiting to receive the update.
Once the upgrade has been successfully installed, verify the firmware version in
[6.1 Setpoints: SETPOINT ACCESS].
6.11 Setpoints: CALIBRATION MODE
When the user is operating the setpoints on this menu, the IPR96D does not guarantee the correct performance of the
protection and storage of Events, as well as the correct execution of the measuring functions.
For security purposes, it is therefore highly suggested that the user take the necessary precautions before operating in this section.
Calibration Mode
Display Brightness
Value
5
RANGE: 0
10
Choose the Display Brightness to be applied when the IPR96D is not in
Autoscroll mode.
Calibration Mode
Display Contrast
Value
5
RANGE: 1
10
Choose the Display Contrast.
Calibration Mode
Test HMI
Value
No
RANGE: Yes; No
Choose YES and press
ENTER
, to carry out a test of the display and the leds.
The display will show only dots and the leds will turn on for a couple of seconds.
