8. Menu
RESET
IPR96D Ground Protection Relay
8.1
Instruction Manual: IPR96D GBM 24/11/2020
8.
Menu RESET
All the programming must be carried out by qualified personnel with adequate knowledge of the operation of the unit and of the
content of this manual.
8.1 RESET
This Main Menu option allows the user to execute a RESET of the IPR96D.
The Reset command does not cancel any acquired data (Events, Counters
…), instead, it resets a fault condition (including Trip)
if it is no longer present; and/or eliminates the notification of a previously stored fault condition.
Reset
Reset Relays?
No
RANGE: NO; YES
Scroll
▲ ▼ to select YES and press
ENTER
to proceed >> Reset Sent.
To abort, press
⤺
ESC
.
This Menu can be accessed by a Shortcut:
Press down ENT and ESC contemporarily for more than two seconds.
Another way to proceed with the RESET is through Modbus RS485, only if [6.2
Setpoints: SYSTEM SETUP:
Command]
REMOTE 485 or REMOTE BLE+485.
