6. Menu
SETPOINTS
IPR96D Ground Protection Relay
6.6
Instruction Manual: IPR96D GBM 24/11/2020
6.7 Setpoints: EVENT RECORDER
You can enable/disable the recording of each type of event. All events, up to 100 maximum, will be stored in a memory buffer
operating in FIFO (First-In, First-Out) mode. Once 100 events are stored, the new event will push out the oldest one from the
Event List.
Event Recorder
System Events
Value
ENABLED
RANGE:
ENABLED; DISABLED
Event Recorder
Output Relays
Events
Value
DISABLED
RANGE:
ENABLED; DISABLED
Event Recorder
Digital Input.
Events
Value
DISABLED
RANGE:
ENABLED; DISABLED
Note: If enabled, these events will be stored during digital inputs normal
operation and in the following cases:
•
After the IPR96D is powered on
•
When Digital Input function is modified
[6.5 Setpoints: DIGITAL
INPUT
].
Event Recorder
Gnd Current Protect.
Events
Value
ENABLED
RANGE:
ENABLED; DISABLED
6.8 Setpoints: MODBUS COMMUNICATION
This section contains the settings that allow the IPR96D communication with other devices.
Modbus Comm.
Modbus
Address 1
Value
1
RANGE: 1
247
STEPS: 1
Modify the Modbus ID.
Modbus Comm.
RS-485
Baudrate
Value
9600
RANGE:
9600; 19200; 38400; 57600; 115200
Select the Baud rate.
Modbus Comm.
RS-485
Config.
Value
8N1
RANGE:
8N1; 8N2; 8E1; 8E2; 8O1; 8O2
Specify the parity and the Stop-bit.
For further information, download
Modbus Memory Map
from the Orion Italia website.
