DGS-7084GCP-AIO_S SERIES User’s Manual
ORing Industrial Networking Corp
90
enter a specific sender IP address in dotted decimal notation.
Sender IP Mask
When "Network" is selected for the sender IP filter, you can enter a
specific sender IP mask in dotted decimal notation.
Target IP Filter
Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is "don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address in
the Target IP Address field that appears. Network: Target IP filter is
set to Network. Specify the target IP address and target IP mask in
the Target IP Address and Target IP Mask fields that appear.
Target IP Address
When "Host" or "Network" is selected for the target IP filter, you can
enter a specific target IP address in dotted decimal notation.
Target IP Mask
When "Network" is selected for the target IP filter, you can enter a
specific target IP mask in dotted decimal notation.
ARP SMAC Match
Specify whether frames can hit the action according to their sender
hardware address field (SHA) settings.
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").
RARP SMAC
Match
Specify whether frames can hit the action according to their target
hardware address field (THA) settings.
0: RARP frames where THA is not equal to the SMAC address.
1: RARP frames where THA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").
IP/Ethernet
Length
Specify whether frames can hit the action according to their
ARP/RARP hardware address length (HLN) and protocol address
length (PLN) settings.
0: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and
the (PLN) is equal to IPv4 (0x04) must not match this entry.
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and
the (PLN) is equal to IPv4 (0x04) must match this entry.
Any: Any value is allowed ("don't-care").
IP
Specify whether frames can hit the action according to their
ARP/RARP hardware address space (HRD) settings.
0: ARP/RARP frames where the HLD is equal to Ethernet (1) must
not match this entry.
1: ARP/RARP frames where the HLD is equal to Ethernet (1) must
match this entry.