manualshive.com logo in svg

ORiNG DGS-7084GCP-AIO_S SERIES, User Manual, Page: 85 / 138

Share
Download
ORiNG DGS-7084GCP-AIO_S SERIES User Manual Download Page 85

 

DGS-7084GCP-AIO_S SERIES User’s Manual 

 

 

ORing Industrial Networking Corp

 84

Label 

Description 

Rate Limiter ID 

The rate limiter ID for the settings contained in the same row. 

Rate 

The rate unit is packet per second (pps), configure the rate as 1, 2, 4, 

8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 

256K, 512K, or 1024K.   

The 1 kpps is actually 1002.1 pps. 

 
4.1.10.3.3 ACL Configuration 

Configure an ACE (Access Control Entry) on this page. 

 

An ACE consists of several parameters. These parameters vary according to the frame type 

that you select. First select the ingress port for the ACE, and then select the frame type. 

Different parameter options are displayed depending on the frame type that you selected. 

 

A frame that hits this ACE matches the configuration that is defined here. 

 

 

Label 

Description 

Ingress Port 

Select the ingress port for which this ACE applies.   

Any: The ACE applies to any port.   

Port n: The ACE applies to this port number, where n is the number 

of the switch port.   

Policy n: The ACE applies to this policy number, where n can range 

from 1 through 8. 

Frame Type 

Select the frame type for this ACE. These frame types are mutually 

exclusive.  

Any: Any frame can match this ACE.   

Ethernet Type: Only Ethernet Type frames can match this ACE. The 

IEEE 802.3 descripts the value of Length/Type Field specifications 

should be greater than or equal to 1536 decimal (equal to 0600 

Summary of Contents for DGS-7084GCP-AIO_S SERIES











































































































































Reviews:

No comments