manualshive.com logo in svg

ORiNG DGS-7084GCP-AIO_S SERIES, User Manual, Page: 49 / 138

Share
Download
ORiNG DGS-7084GCP-AIO_S SERIES User Manual Download Page 49

 

DGS-7084GCP-AIO_S SERIES User’s Manual 

 

 

ORing Industrial Networking Corp

 48

Label 

Description 

Port 

The switch port number of the logical RSTP port. 

RSTP 

The number of RSTP Configuration BPDU's received/transmitted 

on the port. 

STP 

The number of legacy STP Configuration BPDU's 

received/transmitted on the port. 

TCN 

The number of (legacy) Topology Change Notification BPDU's 

received/transmitted on the port. 

Discarded Unknown 

The number of unknown Spanning Tree BPDU's received (and 

discarded) on the port. 

Discarded Illegal 

The number of illegal Spanning Tree BPDU's received (and 

discarded) on the port. 

 

Click to refresh the page immediately. 

 

Check this box to enable an automatic refresh of the page at 

regular intervals. 

 
4.1.5.4 Fast 

Recovery 

mode 

The Fast Recovery Mode can be set to connect multiple ports to one or more switches.    The 

Fast Recovery mode supports 12 priorities, only the first priority will be the act port, the other 

ports configured with other priority will be the backup ports. 

 

Fast Recovery Mode interface 

 

 

 

Summary of Contents for DGS-7084GCP-AIO_S SERIES











































































































































Reviews:

No comments