manualshive.com logo in svg

ORiNG DGS-7084GCP-AIO_S SERIES, User Manual, Page: 25 / 138

Share
Download
ORiNG DGS-7084GCP-AIO_S SERIES User Manual Download Page 25

 

DGS-7084GCP-AIO_S SERIES User’s Manual 

 

 

ORing Industrial Networking Corp

 24

7. DOCSIS cable device 

8. Station only 

9. Reserved 

 

When a capability is enabled, the capability is followed by (+). If 

the capability is disabled, the capability is followed by (-). 

Management 

Address 

Management Address is the neighbor unit's address that is used 

for higher layer entities to assist the discovery by the network 

management. This could for instance hold the neighbor's IP 

address. 

 

Click to refresh the page immediately. 

 

Check this box to enable an automatic refresh of the page at 

regular intervals. 

 

LLDP Statistics 

This page provides an overview of all LLDP traffic.   

Two types of counters are shown. Global counters are counters that refer to the whole stack, 

switch, while local counters refer to counters for the currently selected switch. 

 

 

Global Counters 

Label 

Description 

Neighbor entries 

were last changed at

 

Shows the time for when the last entry was last deleted or added. 

It is also shows the time since last change was detected. 

Total Neighbors 

Entries Added 

Shows the number of new entries added since switch reboot. 

Summary of Contents for DGS-7084GCP-AIO_S SERIES











































































































































Reviews:

No comments