manualshive.com logo in svg

ORiNG DGS-7084GCP-AIO_S SERIES, User Manual, Page: 70 / 138

Share
Download
ORiNG DGS-7084GCP-AIO_S SERIES User Manual Download Page 70

 

DGS-7084GCP-AIO_S SERIES User’s Manual 

 

 

ORing Industrial Networking Corp

 69

4.1.8 Traffic Prioritization 
4.1.8.1 Storm 

Control 

There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. 

These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC 

Address table.   

The rate is 2^n, where n is equal to or less than 15, or "No Limit". The unit of the rate can be either pps 

(packets per second) or kpps (kilopackets per second). The configuration indicates the permitted packet 

rate for unicast, multicast, or broadcast traffic across the switch.   

 

Note: Frames, which are sent to the CPU of the switch are always limited to aproximately 4 kpps. For 

example, broadcasts in the management VLAN are limited to this rate. The management VLAN is 

configured on the IP setup page.   

 

 

Label 

Description 

Frame Type

 

The settings in a particular row apply to the frame type listed here: 

unicast, multicast, or broadcast. 

Status 

Enable or disable the storm control status for the given frame 

type. 

Rate 

The rate unit is packet per second (pps), configure the rate as 1K, 

2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, or 1024K.   

The 1 kpps is actually 1002.1 pps. 

 
 
 
 
 
 
 
 

Summary of Contents for DGS-7084GCP-AIO_S SERIES











































































































































Reviews:

No comments