3 Preparation
−
8
−
3.7 Basic operations of the
OPX-2A
Use the six keys
to set data and operate the motor.
Operation flow
The
OPX-2A
is operated according to the flow shown below.
Level 2:
Item selection screen
Level 3
Level 1:
Top screen in each mode
1
2
3
4
to
Use
navigate through
the modes.
to move
Use
to the lower level.
to move
Use
to the upper level.
Use
to
move to the
previous item.
Use
to
move to the
next item.
①
Use the
key to select a desired operation mode appropriate for your intended
operation.
Example: If you want to use a function in the test mode, press the
key to select the test
mode (indicated by a lit “TEST” LED). The top screen of the test mode is displayed.
②
Press the
key to move to the lower level.
③
Use the
keys to select a desired item.
④
To move to the lower level, press the
key.
To return to the previous level, press the
key.
As explained above, use the
key to navigate through the levels and use the
keys to
select a desired item. This is the basic operation flow.
Note
If the
key on the
OPX-2A
is pressed while internal processing is being
performed via RS-485 communication, the top screen will not change to any of its
sub-screens and “mEm-bUSY” will be shown on the display. Be sure to wait until all
internal processing is completed, before pressing the
key.
Summary of Contents for OPX-2A
Page 43: ......
