10 Copy mode
−
39
−
•
What happens when the
key is pressed while the motor is operating
While the motor is operating, you cannot move to any lower level
from the top screen of the copy mode. Pressing the
key will
generate an error, and “oPE-Err” will be shown.
Be sure to stop the motor operation before pressing the
key.
•
What happens when the
key is pressed while the edit lock is enabled
While the edit lock is enabled, you cannot move to any lower level
from the top screen of the copy mode. Pressing the
key will
generate an error, and “LocK-Err” will be shown.
Be sure to cancel the edit lock before pressing the
key. Refer
to p.7 for the procedure to cancel the edit lock.
10.3 Downloading to the driver
In this operation, data in the specified data bank
number are downloaded to the driver.
Download
OPX-2A
data to the driver.
Driver
Data bank selection 0
Data bank selection 3
Top screen of download
Download successful (blinking display)
to input
a value between 0 and 3.
Use
Note
•
System parameters that have been changed will become effective after the power
is cycled. If the system parameters have been changed as a result of the download,
cycle the driver power.
•
Do not turn off the driver power while the download is still in progress (= while the
display is blinking). Doing so may damage the data.
Summary of Contents for OPX-2A
Page 43: ......
