Oriental motor NETC01-M3, User Manual

Page: 58 / 62

Operation using the OP X - 2 A
−58−
„
System parameter
Parameter name Description Setting range Initial value
OPX-2A
screen
display
Connection (address number 0)
Sets whether to
enable or disable the
communication with the
connected product.
0: Disable
1: Enable
0: Disable
SYS-4-00
Connection (address number 1) SYS-4-01
Connection (address number 2) SYS-4-02
Connection (address number 3) SYS-4-03
Connection (address number 4) SYS-4-04
Connection (address number 5) SYS-4-05
Connection (address number 6) SYS-4-06
Connection (address number 7) SYS-4-07
Connection (address number 8) SYS-4-08
Connection (address number 9) SYS-4-09
Connection (address number 10) SYS-4-10
Connection (address number 11) SYS-4-11
Connection (address number 12) SYS-4-12
Connection (address number 13) SYS-4-13
Connection (address number 14) SYS-4-14
Connection (address number 15) SYS-4-15
Note • If operations are limited by the edit lock function (p.51), parameters cannot be edited.
• The non-volatile memory can be rewritten approx. 100,000 times.
13.9 Copy mode
„
Download
Parameters saved in the OPX-2A can be copied
to the
NETC01-M3
.
If a download error occurs, a code indicating the
description of the error will blink on the display.
Download will not be performed and the display
will return to the top screen of download.
Refer to "Error of the copy mode" for the error
display.
NETC01-M3
Upload NETC01-M3
parameters to the
OPX-2A
.
Download
OPX-2A
parameters
to the NETC01-M3 .
„
Upload
Parameters saved in the
NETC01-M3
can be copied to the
OPX-2A
.
„
Verification
Parameters in the OPX-2A can be verified against the corresponding parameters in the NETC01-M3 .
If the verification finds that the two sets of parameter match, “Good” will be shown. If the two do not match,
“Error” will be shown.
If a verification error occurs, a code indicating the description of the error will blink on the display.
Verification will not be performed and the display will return to the top screen of verification.
Refer to "Error of the copy mode" for the error display.
„
Initializing parameters
Parameters saved in the NETC01-M3 can be restored to the initial values.