755-00002 Rev K
LifePort Kidney Transporter Operator’s Manual
35
15. Use the arrow buttons to enter the correct cross clamp time zone.
NOTE:
The time zone must be in 3 characters, e.g., “CST” for “Central Standard Time”.
16. Click
OK
, then select
SAVE
to confirm.
17. Use the arrow buttons to select
DATE
, then press
OK
.
18. Use the arrow buttons to enter the date.
19. Click
OK
, then select
SAVE
to confirm.
Placing the Kidney
Where noted, perform the following procedures using aseptic technique—ideally the same surgical field
used when placing the kidney in the Kidney Cradle.
1.
A person outside the aseptic field, remove the Outer Lid from the Perfusion Circuit.
2.
Using aseptic technique
, position the folded LifePort Kidney Transporter Disposable Kidney
Sterile Drape (supplied) over the Perfusion Circuit as shown.
3.
Using aseptic technique
, unfold the Sterile Drape along the length of LifePort Kidney Transporter.
4.
Using aseptic technique
, fully unfold the Sterile Drape, side-to-side.
5.
Using aseptic technique
, position the drape opening down around the covered Perfusion Circuit.
6.
Using aseptic technique
, remove the Inner Perfusion Circuit Lid.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6