
755-00002 Rev K
LifePort Kidney Transporter Operator’s Manual
11
•
Pressure Sensor Cable
—Provides LifePort Kidney Transporter computer with information about the
perfusion pressure felt by the kidney. If the Pressure Sensor connection is broken, LifePort Kidney
Transporter stops and displays an error message.
•
The Infuse and Wash Valves
—Determine whether the perfusate enters (Infuse Valve) or bypasses
(Wash Valve) the kidney. In
INFUSE
mode, the Infuse Valve is open and the Wash Valve is closed,
allowing perfusate to flow into the kidney. In
WASH
Mode and during bubble purge, the Wash Valve is
open and the Infuse Valve is closed, directing the perfusate through the bypass line, directly back into
the perfusate reservoir. The valves are electrically activated.
Electronics
Electronic circuits control LifePort Kidney Transporter functions and user interactions, manage power
and enable communications over standard computer interfaces. All circuits are contained within LifePort
Kidney Transporter electronics module and include:
•
Computer
•
Batteries and battery charger
•
Communications interface
•
Sensor interface
•
Power supply (a hospital-grade Power Cord is supplied…do not substitute.)
•
Pump and valve driver circuits
•
Fan
External Connections
LifePort Kidney Transporter connects with an external power source and
other devices through its back panel, which provides a standard AC Power
Cord connector and USB-A and USB-B Data Ports.
Circuit Breaker
Two Circuit Breakers, located on the back panel, trip if a short circuit occurs.
Depressing the button resets the breaker.
Control Panel
The Control Panel is located next to the Pump Deck. The panel can be accessed only when the Cover is
removed, which prevents inadvertent and unauthorized access to the controls.
The display indicates when the Power, Stop, Wash, Prime and Infuse Modes have been selected.
POWER
Off / On
RAISE AND LOWER
infusion pressure (by
1-mmHg increments)
PRESSURE SETPOINT
display (default
30 mmHg)
DATA ENTRY /
DISPLAY
screen
5-WAY KEYPAD
(allows navigation for
highlighting, selecting
and entering information)
SELECT MODE
(Wash, Prime,
Infuse, Stop)
30
SET
mmHg
Wash
Prime
Infuse
Organ ID:
ABC123
Kidney - Right
Blood Type - O+
Cross Clamp Time:
23:00 CST
Circuit Breakers
Data Port
Batteries
AC Plug