User manual
FLEXI 50
13
5.
Remove the inner front cover
Separate the front panel of the indoor unit from its back part. To do this, unhook the latches securing the
front panel and open it as shown in the figure below.
6.
Preparation of the indoor unit
Remove the three retaining screws from the left cover to enable access to the terminals. Route the power
wires through the appropriate cable glands.
7.
Mounitng of the indoor unit
Fix the back part of the indoor unit on the wall with the screws supplied with the mounting kit of the
ventilator.
8.
Electrical cable fixation
Route the power cable as figured below and connect the ventilator to power mains in compliance with the
external wiring diagram,see section
Connection to power mains
. Secure the power cable with the clamp.
9.
Mounting the left cover
