User manual
FLEXI 50
2
1.1
Unit installation and operation safety precautions
Unpack the unit with care.
Disconnect the unit from
power mains prior
to any installation
operations.
The unit must not be
grounded!
While installing the unit,
follow the safety
regulations specific to the
use of electric
tools..
Do not change the power
cable length at your own
discretion. Do not bend the
power cable. Avoid
damaging the power
cable. Do not put any foreign
objects on the
power cable.
Do not lay the power cable
of the unit in
close proximity to heating
equipment.
Do not use damaged
equipment or cables
when connecting the unit to
power mains.
Do not operate the unit
outside the temperature
range stated in the user’s
manual. Do not operate the
unit in aggressive or
explosive environments.
Do not touch the unit
controls with wet hands. Do
not carry out the installation
and maintenance operations
with wet hands..
Do not wash the unit with
water. Protect the electric
parts of the unit against
ingress of water.
Do not store any explosive or
highly
flammable substances in
close proximity to
the unit.
When the unit generates
unusual sounds, odour, or
emits smoke, disconnect it
from power supply and
contact the Seller.
Do not open the unit during
operation.
Do not direct the air flow
produced by the unit
towards open flame or
ignition sources.
Do not block the air duct
when the unit is switched
on.
In case of continuous
operation of the unit,
periodically check the
security of mounting.
