User manual
FLEXI 50
31
•
To configure Wi-Fi parameters of the Master ventilator, do the following:
•
Press and hold the Ventilation button
on the master ventilator casing. Wait for the beep
and the blinking of all the LEDs on the unit casing.
•
Repeat the steps with all the slave ventilators and wait for the beep when all the LEDs stop blinking on
each Slave unit.
•
Set the Master unit to the standard operation mode. Press and hold
Wait for the beep when
all the LEDs the Ventilation button stop blinking.
Note:
if the home router works in conjunction with several Wi-Fi access points requiring connection of
ventilators to different access points:
•
Connect the Master unit to the first Wi-Fi access point.
•
Complete the connection with the first group of Slave units.
•
Connect the Master unit to the second Wi-Fi access point.
•
Complete the connection with the second group of Slave units.
9.16
Special ventilator setting mode
In the event of losing the Wi-Fi password or the master ventilator password or in other cases use the recovery
access to the ventilator functions. To enter the special Setup mode, press and hold the Ventilation button
n the ventilator casing for
5 seconds
until the beep and blinking of all the LED lights. The ventilator
will continue in this mode for 3 minutes and then will automatically revert to the previous settings. To exit the
Setup mode immediately, press and hold the Ventilation button
on the ventilator casing once
again for 5 seconds until the beep and shutdown of all the LED lights. In this mode the following settings are
available:
•
Wi-Fi network name: Setup mode.
•
Wi-Fi password:
11111111
.
•
The unit password is ignored.
