User manual
FLEXI 50
25
9.6
Timer setup
To set the
Night mode, Party mode
timer and the turn-off delay timer for
the
Boost
mode, go to Menu - Settings-Timers in the mobile application.
The Night mode timer
sets the delay for the ventilator to switch to Speed
I after the Night mode activation (8 hours by default).
The Party timer
defines the delay for the ventilator to switch to Speed Ill
after the Party mode activation (4 hours by default).
The turn-off delay timer for the Boost mode
defines the delay time for
operation at Speed Ill after the actuation of any of the sensors and their
return to the standard state.
9.7
Sensor setup
To set up sensor operation via the mobile app, go to
Menu-> Settings->
Sensors.
Humidity sensor:
activation of the humidity sensor. When the indoor
humidity exceeds the set point, the unit switches to Speed Ill. When the
humidity level drops below the threshold value, the Boost turn-off delay
timer is activated. When the timer elapses, the ventilator reverts to the
previous speed setting.
0-10V sensor:
activation of the external analogue sensor 0-10 V.
When a 0-1 OV control signal value exceeds the set point, the ventilation
unit changes to the maximum speed. When the signal drops below the
threshold value, the Boost turn-off delay timer is activated. When the
timer elapses, the ventilator reverts to the previous speed setting.
Relay sensor:
activation of the external relay sensor. When the no-
contact of the external relay sensor is closed, the unit changes to the
maximum speed. Upon the opening of the NO-contact the Boost turn-
off delay timer is activated. When the timer elapses, the ventilator
reverts to the previous speed setting.
